Fixer Upper: TexasSized House; Small Town Charm HGTVs Fixer Upper With Chip and Joanna

Historical fire pits were sometimes built from the ground, within caves, or in the center of a hut or dwelling. Evidence of prehistoric, man-made fires exists on all five inhabited continents. The drawback of early indoor fire pits was that they generated toxic and/or irritating smoke inside the dwelling.Fire pits grown into elevated hearths in buildings, but venting smoke depended on open windows or holes in roofs. The medieval great hall typically needed a centrally situated hearth, where an open fire burned with the smoke rising to the port in the roof. Louvers were developed during the Middle Ages to enable the roof vents to be coated so snow and rain would not enter.

Additionally during the Middle Ages, smoke canopies were invented to stop smoke from spreading through a room and vent it out via a ceiling or wall. These can be put against stone walls, instead of taking up the center of the space, and this enabled smaller chambers to be warmed.Chimneys were devised in northern Europe from the 11th or 12th centuries and largely fixed the issue of fumes, more faithfully venting smoke out. They made it feasible to provide the fireplace a draft, and made it feasible to put fireplaces in numerous rooms in buildings handily. They did not come into general usage instantly, however, since they were expensive to develop and maintain.

In 1678 Prince Rupert, nephew of Charles I, raised the grate of the fireplace, improving the venting and airflow system. Benjamin Franklin developed a convection room for the fireplace which greatly enhanced the efficiency of fireplaces and wood stoves. In addition, he improved the airflow by pulling air from a cellar and venting out a lengthier place on top. In the later 18th century, Count Rumford made a fireplace using a tall, shallow firebox that was better at drawing the smoke up and out of the building. The shallow design improved greatly the amount of radiant heat projected into the space. Rumford's layout is the foundation for modern kitchens.

The Aesthetic movement of the 1870s and 1880s took to a more conventional spectra based on stone and also deflected unnecessary ornamentation. Rather it relied on simple designs with little unnecessary ornamentation. In the 1890s the Aesthetic movement gave way into the Arts and Crafts movement, in which the emphasis was still placed on providing quality stone. Stone fireplaces now have been a symbol of prosperity, which to a degree remains the idea today.A fireplace is a construction made from brick, stone or metal designed to include a fire. Fireplaces are utilized for its relaxing ambiance that they create and for heating a room. Modern fireplaces vary in heat efficacy, depending on the plan.

Historically they were used for heating a dwelling, cooking, and heating water for domestic and laundry uses. A fireplace may have the following: a foundation, a hearth, a firebox, a mantelpiece; a chimney (utilized in laundry and kitchen fireplaces), a grate, a lintel, a lintel pub, house overmantel, a damper, a smoke room, a neck, a flue, and a chimney filter or afterburner.

Related Images with Fixer Upper: TexasSized House; Small Town Charm HGTVs Fixer Upper With Chip and Joanna

Fixer Upper: TexasSized House; Small Town Charm HGTVs Fixer Upper With Chip and Joanna

On the exterior there is often a corbeled brick crown, where the projecting courses of brick act as a drip course to keep rainwater from running down the outside walls. A hood, cap, or shroud functions to keep rainwater out of the exterior of the chimney; rain in the chimney is a far larger problem in chimneys lined with impervious flue tiles or metallic liners than with the standard masonry chimney, that divides up all but the most violent rain. Some chimneys have a spark arrestor integrated into the cap or crown.

Organizations like the United States Environmental Protection Agency and the Washington Department of Ecology warn that, according to various studies, fireplaces could pose a substantial health risk. The EPA writes"Smoke may smell great, but it's not great for you.

Types of fireplacesArtificial fireplaces are made with sheet glass or metal flame boxes.Electric fireplaces could be built-in replacements for wood or gas or retrofit with log inserts or electric fireboxes.

Masonry and prefabricated fireplaces can be fueled by wood, natural gas, biomass and gas fuel sources. In the United States, several states and local businesses have laws restricting these kinds of fireplaces. There are also air quality management problems due to the amount of moisture that they release into the room atmosphere, and oxygen sensor and carbon monoxide sensors are security essentials. Direct vent fireplaces are fueled by liquid propane or natural gas. They are totally sealed from the area that is heated, and vent all exhaust gasses into the outside of the structure.

Fireplace Mantel Decor Ideas for Decorating for Thanksgiving

AccessoriesA vast assortment of accessories are used with fireplaces, which range between states, regions, and historical periods. For the interior, common in recent Western cultures include grates, fireguards, log boxes, andirons, pellet baskets, and fire puppies, all of which cradle fuel and accelerate burning. A grate (or flame grate) is a frame, usually of iron bars, to retain fuel to your fire. Heavy metallic firebacks are occasionally utilized to catch and re-radiate heat, to protect the rear of the fireplace, and as decoration. Fenders are low metal frames set before the fireplace to include embers, soot and ash. For fireplace tending, tools comprise pokers, bellows, tongs, shovels, brushes and tool stands. Other wider accessories may consist of log baskets, companion sets, coal buckets, cabinet accessories and more.

As time passes, the purpose of fireplaces has changed from one of requirement to one of interest. Early ones were fire pits compared to modern fireplaces. They were used for heat on cold days and nights, in addition to for cooking. They also served as a gathering place within the house. These fire pits were generally based within a space, allowing more individuals to collect around it.

Fireplace Makeover and Styled with Decor from Target! Nesting With Grace

Spring Home Tour Fireplace Mantles Christmas fireplace, Mantal decor, Fireplace mantels

Many defects were found in early fireplace designs. The most renowned fireplace performers of the time were the Adam Brothers. They perfected a style of fireplace design which was used for generations. It was smaller, more brightly lit, with a emphasis on the quality of the substances used in their construction, as opposed to their dimensions.

By the 1800s most new fireplaces were composed of 2 components, the surround and the add. The encircle consisted of the mantlepiece and sides supports, usually in wood, granite or marble. The insert was fire burned, and was constructed of cast iron often backed with ornamental tiles. As well as providing warmth, the fireplaces of the Victorian age were believed to add a cozy ambiance to homes.

Spring Home Tour Fireplace Mantles Christmas fireplace, Mantal decor, Fireplace mantels Video

Some fireplace units incorporate a blower which transfers more of the fireplace's heat to the atmosphere via convection, resulting in a more evenly heated area and a lower heating load. Fireplace efficiency is also enhanced with the use of a fireback, a sheet of metal that sits behind the flame and reflects heat back into the room. Firebacks are traditionally produced from cast iron, but can also be manufactured from stainless steel. Efficiency is a complicated concept although with open hearth fireplaces. Most efficacy tests consider only the impact of heating of the air. An open fireplace is not, and never was, designed to heat the atmosphere. A fireplace with a fireback is a radiant heater, and has done so as the 15th century. The ideal method to estimate the output signal of a fireplace is in case you notice you're turning the thermostat up or down.

Most older fireplaces have a relatively low efficiency rating. Standard, contemporary, weatherproof masonry fireplaces still possess an efficiency rating of at least 80% (legal minimum necessity for example in Salzburg/Austria). To improve efficiency, fireplaces may also be altered by inserting special heavy fireboxes designed to burn much cleaner and can reach efficiencies as high as 80% in heating the air. These altered fireplaces are usually equipped with a massive fire window, enabling an efficient heating process in two stages. During the first phase the first heat is provided through a large glass window while the flame is burning. In this time the construction, constructed of refractory bricks, absorbs the heat. This warmth is then evenly radiated for several hours during the second phase. Masonry fireplaces with no glass fire window just provide heat radiated from the surface. Based on outside temperatures 1 to two daily firings are sufficient to ensure a constant room temperature.fireplace decor

From My Front Porch To Yours: How I Found My Style Sundays Adventures In Decorating

Ancient fire pits were sometimes constructed in the ground, within caves, or in the center of a hut or home. Evidence of prehistoric, man-made fires exists on all five inhabited continents. The drawback of early indoor fire pits was that they generated hazardous or irritating smoke inside the dwelling.Fire pits developed into elevated hearths in structures, but venting smoke depended on open windows or openings in roofs. The great hall typically needed a centrally located hearth, where a open flame burnt with all the smoke climbing into the port in the roof. Louvers were developed during the Middle Ages to enable the roof vents to be covered so snow and rain would not enter.

Additionally during the Middle Ages, smoke canopies were devised to stop smoke from spreading through a room and vent it out via a ceiling or wall. These can be put against stone walls, instead of taking up the center of the space, and this enabled smaller chambers to be warmed.Chimneys were devised in northern Europe from the 11th or 12th centuries and mostly fixed the problem of fumes, more faithfully venting smoke outside. They made it possible to give the fireplace a draft, and made it feasible to put fireplaces in multiple rooms in buildings conveniently. They did not come into general use immediately, however, as they were expensive to build and maintain.

In 1678 Prince Rupert, nephew of Charles I, raised the grate of the fireplace, improving the venting and airflow system. The 18th century saw two important developments in the history of fireplaces. Benjamin Franklin developed a convection room for the fireplace which greatly enhanced the efficiency of fireplaces and wood stoves. He also enhanced the airflow by pulling air from a basement and venting a longer area on top. In the later 18th century, Count Rumford designed a fireplace using a tall, shallow firebox that was better at drawing up the smoke and out of the building. The shallow design improved greatly the amount of radiant warmth projected into the space. Rumford's layout is the foundation for modern kitchens.

The Aesthetic movement of the 1870s and 1880s took on a more traditional spectra based on stone and also deflected unnecessary ornamentation. Instead it depended on simple layouts with small unnecessary ornamentation. In the 1890s the Aesthetic movement gave way to the Arts and Crafts movement, in which the emphasis was still placed on providing quality stone. Stone fireplaces now have been a symbol of wealth, which to some degree is still the notion today.A fireplace is a structure made of brick, stone or metal designed to include a fire. Fireplaces are used for the relaxing ambiance that they create and for heating a space. Modern fireplaces change in heat efficacy, based upon the plan.

Historically they have been utilized for heating a dwelling, cooking, and heating water for domestic and laundry uses. A fireplace may have the following: a foundation, a hearth, a firebox, a mantelpiece; a chimney (utilized in kitchen and laundry fireplaces), a grate, a lintel, a lintel pub, house overmantel, a damper, a smoke room, a throat, a flue, and a chimney filter or afterburner.

Related Images with From My Front Porch To Yours: How I Found My Style Sundays Adventures In Decorating

25+ best ideas about Fireplace Mantel Decorations on Pinterest Mantle decorating, Mantels

On the exterior there is frequently a corbeled brick crown, in which the projecting courses of brick act as a drip route to keep rainwater from running down the exterior walls. A cap, hood, or shroud serves to keep rainwater out of the outside of the chimney; rain at the chimney is a far greater problem in chimneys lined with impervious flue tiles or metallic liners compared with the traditional masonry chimney, which divides up all but the most violent rain. A few chimneys have a spark arrestor incorporated into the cap or crown.

Organizations such as the United States Environmental Protection Agency and the Washington Department of Ecology warn that, according to different studies, fireplaces can pose a significant health risk. The EPA writes"Smoke may smell good, but it's not good for you.

Types of fireplacesArtificial fireplaces are made with sheet metal or glass fire boxes.Electric fireplaces can be built-in replacements for either wood or gas or retrofit with log inserts or electrical fireboxes.

Masonry and prefabricated fireplaces can be fueled by wood, natural gas, biomass and propane fuel sources. Ventless Fireplaces (duct free/room-venting fireplaces) are fueled by gel, liquid propane, bottled gas or natural gas. In the USA, several states and local counties have laws restricting these kinds of fireplaces. There are also air quality control problems due to the quantity of moisture they release in the room air, and oxygen sensor and carbon monoxide sensors are safety essentials. Direct vent fireplaces have been fueled by liquid propane or natural gas. They are completely sealed from the area that's heated, and vent all exhaust gasses into the outside of the structure.

20 Mantel and Bookshelf Decorating Tips Living Room and Dining Room Decorating Ideas and

AccessoriesFor the inside, common in current Western cultures comprise grates, fireguards, log boxes, andirons, bark baskets, and fire dogs, all of which cradle gas and quicken burning. A grate (or fire grate) is a framework, usually of iron bars, to maintain fuel for a fire. Heavy metal firebacks are occasionally utilized to catch and re-radiate heat, to protect the back of the fireplace, and as decoration. Fenders are low metal frames placed before the fireplace to include embers, soot and ashes. Other wider accessories can consist of log baskets, companion sets, coal buckets, cabinet accessories and much more.

Over time, the purpose of fireplaces has transformed from one of necessity to one of visual interest. Early ones were more fire pits compared to modern fireplaces. They have been used for warmth on chilly days and nights, as well as for cooking. They also functioned as a gathering place inside the home. These fire pits were generally centered within a room, allowing more people to gather around it.

Cupcakes Couture: Design Inspiration: Fall Fireplaces

Decorate Your Mantel Year Round HGTV

Many defects were found in early fireplace designs. The most renowned fireplace designers of the time were the Adam Brothers. They perfected a kind of fireplace design which has been used for generations. It had been smaller, more brightly lit, with a emphasis on the level of the materials used in their construction, instead of their size.

By the 1800s most new fireplaces were composed of two components, the surround and the insert. The encircle comprised of the mantlepiece and sides affirms, typically in wood, granite or marble. The fit was where the fire burned, and was constructed of cast iron frequently backed with ornamental tiles. In addition to providing heat, the fireplaces of the Victorian age were believed to add a cozy ambiance to houses.

Decorate Your Mantel Year Round HGTV Video

Some fireplace units include a blower that transfers more of the fireplace's heat to the air via convection, resulting in a more evenly heated space and a decrease heating load. Fireplace efficiency is also increased by means of a fireback, a sheet of metal that sits behind the flame and reflects heat back into the room. Firebacks are traditionally produced from cast iron, but are also made from stainless steel. Efficiency is a complicated notion though with open hearth fireplaces. Most efficacy tests consider only the effect of heating of the air. An open fireplace is not, and never was, designed to heat the air. A fireplace with a fireback is a radiant heater, and has done so since the 15th century. The best way to gauge the output signal of a fireplace is in case you detect you're turning the thermostat down or up.

Most older fireplaces have a relatively low efficiency score. Standard, contemporary, weatherproof masonry fireplaces still possess an efficiency rating of at least 80% (legal minimum requirement such as in Salzburg/Austria). To improve efficiency, fireplaces may also be altered by inserting special heavy fireboxes designed to burn cleaner and may reach efficiencies as high as 80% in heating the air. These modified fireplaces are usually equipped with a large fire window, enabling an efficient heating process in two stages. During the first phase the initial heat is provided through a big glass window while the fire is burning. During this time period the construction, built of refractory bricks, absorbs the warmth. This heat is then equally radiated for many hours during the next phase. Masonry fireplaces without a glass fire window just provide heat radiated from the surface. Based on temperatures 1 to two daily firings are enough to guarantee a constant room temperature.fireplace decor

30+ Amazing fall decorating ideas for your fireplace mantel

Historical fire pits were sometimes built from the ground, in caves, or at the middle of a hut or dwelling. Evidence of prehistoric, man-made fires exists on all five inhabited continents. The drawback of early indoor flame pits was that they produced hazardous or annoying smoke within the house.Fire pits grown into elevated hearths in structures, but ventilation smoke depended on open windows or holes in roofs. The great hall typically needed a centrally situated hearth, where a open flame burned with all the smoke climbing into the vent in the roof. Louvers were developed throughout the Middle Ages to enable the roof vents to be coated so snow and rain would not enter.

Also throughout the Middle Ages, smoke canopies were devised to stop smoke from dispersing an area and vent it out through a wall or roof. These could be placed against rock walls, rather than taking up the center of the room, and this enabled smaller rooms to be heated.Chimneys were devised in northern Europe from the 11th or 12th centuries and mostly fixed the issue of fumes, more reliably venting smoke outside. They made it possible to provide the fireplace a draft, and also made it possible to place fireplaces in multiple rooms in buildings handily. They didn't come into general usage instantly, however, as they were more expensive to build and maintain.

In 1678 Prince Rupert, nephew of Charles I, raised the grate of the fireplace, improving the airflow and venting system. The 18th century saw two important developments in the history of fireplaces. Benjamin Franklin developed a convection chamber for the fireplace which greatly enhanced the efficacy of fireplaces and wood stoves. In addition, he improved the airflow by pulling air from a cellar and venting a longer place on top. In the later 18th century, Count Rumford made a fireplace using a tall, shallow firebox that has been better at drawing up the smoke and from the building. The shallow design improved greatly the amount of radiant heat projected to the room. Rumford's design is the basis for modern kitchens.

The Aesthetic movement of the 1870s and 1880s took to a more conventional spectra based on rock and deflected unnecessary ornamentation. Rather it depended on simple layouts with small unnecessary ornamentation. From the 1890s the Aesthetic movement gave way into the Arts and Crafts movement, in which the emphasis was placed on supplying quality gems. Stone fireplaces now were a sign of prosperity, which to a degree remains the idea today.A fireplace is a construction made from brick, stone or metal designed to contain a fire. Fireplaces are used for its relaxing ambiance that they create and also for heating a room. Modern fireplaces change in heat efficiency, depending upon the design.

Historically they have been used for heating a dwelling, cooking, and heating water for domestic and laundry uses. A fireplace may have the following: a base, a hearth, a firebox, a mantelpiece; a chimney crane (used in kitchen and laundry fireplaces), a grate, a lintel, a lintel pub, house overmantel, a damper, a smoke room, a throat, a flue, and a chimney filter or afterburner.

Related Images with 30+ Amazing fall decorating ideas for your fireplace mantel

Fireplace Mantel Decor Not JUST A Housewife

On the exterior there is often a corbeled brick crown, in which the projecting courses of brick act as a drip route to keep rainwater from running down the exterior walls. A cap, hood, or shroud serves to keep rainwater out of the outside of the chimney; rain in the chimney is a much larger difficulty in chimneys lined with impervious flue tiles or metallic liners than with the traditional masonry chimney, which divides up all but the rain. A few chimneys have a spark arrestor incorporated into the crown or cap.

Organizations like the United States Environmental Protection Agency and the Washington Department of Ecology warn that, according to different studies, fireplaces could pose a substantial health risk. The EPA writes"Smoke may smell good, but it is not great for you.

Kinds of fireplacesArtificial fireplaces are made out of sheet metal or glass flame boxes.Electric fireplaces can be built-in replacements for gas or wood or retrofit with log inserts or electrical fireboxes.

In the United States, some states and local businesses have laws restricting these kinds of fireplaces. They need to be suitably sized to the area to be heated. There are also air quality management issues due to the amount of moisture they release in the room air, and oxygen detector and carbon dioxide sensors are safety essentials. Direct vent fireplaces have been fueled by either liquid propane or natural gas. They are completely sealed in the area that is heated, and port all exhaust gasses to the exterior of the structure.

Fireplace Mantel Designs Keeping the Space Warmth with Beautiful Decor Traba Homes

AccessoriesFor the interior, common in current Western cultures include grates, fireguards, log boxes, andirons, pellet baskets, and fire dogs, all which cradle fuel and accelerate burning. A grate (or fire grate) is a framework, usually of iron bars, to maintain fuel for a fire. Heavy metal firebacks are occasionally utilized to catch and re-radiate heat, to protect the back of the fireplace, and as decoration. Fenders are low metal frames set in front of the fireplace to include embers, soot and ash. For fireplace tending, tools include pokers, bellows, tongs, shovels, brushes and tool stands.

Over time, the intent behind fireplaces has transformed from one of requirement to one of visual interest. Early ones were fire pits compared to modern fireplaces. They were used for warmth on chilly days and nights, as well as for cooking. They also served as a gathering place inside the house. These fire pits were usually centered within a room, allowing more people to gather around it.

50+ Absolutely fabulous Christmas mantel decorating ideas

Best 25+ Fall fireplace decor ideas on Pinterest Fall mantle decor, Fire place mantel decor

Many defects were found in ancient fireplace designs. Together with the Industrial Revolution, came big scale housing developments, necessitating a standardization of fireplaces. The most famous fireplace designers of this period were the Adam Brothers. They perfected a kind of fireplace design that was used for generations. It was smaller, more brightly colored, with a emphasis on the quality of the materials used in their construction, instead of their size.

By the 1800s newest fireplaces were made up of 2 components, the surround and the insert. The surround consisted of the mantlepiece and sides supports, usually in wood, marble or granite. The fit was fire burned, and was constructed of cast iron often backed with ornamental tiles. As well as providing heat, the fireplaces of the Victorian age were believed to add a cozy ambiance to houses.

Best 25+ Fall fireplace decor ideas on Pinterest Fall mantle decor, Fire place mantel decor Video

Some fireplace units incorporate a blower that transports more of the fireplace's heat to the atmosphere via convection, leading to a more evenly heated area and a decrease heating load. Fireplace efficiency is also increased by means of a fireback, a sheet of metal which sits behind the flame and reflects heat back into the room. Firebacks are traditionally produced from cast iron, but are also made from stainless steel. Efficiency is a complex concept although with open hearth fireplaces. Most efficacy tests consider only the impact of heating of the atmosphere. An open fireplace is not, and never was, designed to heat the atmosphere. The ideal way to estimate the output of a fireplace is in case you notice you're turning the thermostat up or down.

Most elderly fireplaces have a relatively low efficiency score. Standard, contemporary, weatherproof masonry fireplaces though have an efficiency rating of at least 80% (legal minimum requirement such as in Salzburg/Austria). To boost efficiency, fireplaces can also be altered by adding special heavy fireboxes designed to burn much cleaner and may reach efficiencies as high as 80% in heating the atmosphere. These altered fireplaces are usually equipped with a massive fire window, enabling an efficient heating system in two stages. During the first phase the first heat is offered through a big glass while the fire is burning. In this time period the construction, built of refractory bricks, absorbs the heat. This heat is then equally radiated for many hours during the next phase. Masonry fireplaces without a glass fire window only provide heat radiated from its surface. Based on temperatures 1 to two daily firings are enough to ensure a constant room temperature.fireplace mantel decor

Fireplace Mantel Decor Not JUST A Housewife

Ancient fire pits were sometimes constructed from the floor, in caves, or in the middle of a hut or home. Evidence of ancient, man-made flames exists on all five inhabited continents. The drawback of premature indoor fire pits was that they produced hazardous or annoying smoke inside the house.Fire pits grown into raised hearths in buildings, but venting smoke relied on open windows or openings in roofs. The medieval great hall typically needed a centrally located hearth, where an open fire burnt with all the smoke rising to the port in the roof. Louvers were developed throughout the Middle Ages to enable the roof vents to be covered so snow and rain wouldn't enter.

Additionally during the Middle Ages, smoke canopies were devised to prevent smoke from spreading through a room and vent it outside through a ceiling or wall. These could be put against stone walls, instead of taking up the middle of the room, and this allowed smaller chambers to be heated.Chimneys were devised in northern Europe in the 11th or 12th centuries and mostly fixed the problem of fumes, more reliably venting smoke outside. They made it feasible to give the fireplace a draft, and also made it possible to put fireplaces in multiple rooms in buildings conveniently. They did not come into general use instantly, however, since they were more expensive to build and maintain.

Benjamin Franklin developed a convection chamber for the fireplace which greatly improved the efficiency of fireplaces and wood stoves. In addition, he improved the airflow by pulling air from a cellar and venting out a lengthier place at the top. At the later 18th century, Count Rumford made a fireplace with a tall, shallow firebox which has been better at drawing up the smoke and out of the construction. The shallow design also improved greatly the amount of radiant warmth projected into the space. Rumford's design is the basis for modern kitchens.

Rather it relied on simple designs with little unnecessary ornamentation. In the 1890s the Aesthetic movement gave way to the Arts and Crafts movement, where the emphasis was placed on providing quality stone. Stone fireplaces at this time have been a symbol of prosperity, which to some degree is still the notion today.A fireplace is a construction made from brick, stone or metal made to contain a fire. Fireplaces are utilized for its relaxing ambiance that they create and also for heating a room. Modern fireplaces vary in heat efficacy, based on the plan.

Historically they have been used for heating a dwelling, cooking, and heating water for laundry and domestic uses. A fire is contained in a firebox or firepit; a chimney or other flue allows exhaust to escape.

Related Images with Fireplace Mantel Decor Not JUST A Housewife

Best 25+ Fall fireplace decor ideas on Pinterest Fall mantle decor, Fire place mantel decor

On the exterior there is often a corbeled brick crown, in which the projecting courses of brick act as a drip course to keep rainwater from running down the outside walls. A hood, cap, or shroud functions to keep rainwater from the outside of the chimney; rain in the chimney is a far greater problem in chimneys lined with impervious flue tiles or metallic liners than with the traditional masonry chimney, which soaks up all but the most violent rain. Some chimneys have a spark arrestor integrated into the cap or crown.

The EPA writes"Smoke may smell great, but it's not great for you.

Types of fireplacesManufactured fireplaces are made with sheet metal or glass fire boxes.Electric fireplaces could be built-in replacements for either wood or gas or retrofit with log inserts or electric fireboxes.

In the United States, several states and local businesses have laws restricting these types of fireplaces. They must be properly sized to the area to be heated. There are also air quality control problems because of the amount of moisture that they discharge into the room atmosphere, and oxygen sensor and carbon monoxide sensors are security essentials. Direct vent fireplaces have been fueled by either liquid propane or natural gas. They are completely sealed in the place that's heated, and port all exhaust gasses into the outside of the structure.

15 Fall Decor Ideas for your Fireplace Mantle

AccessoriesA wide range of accessories are used with fireplaces, which range between states, regions, and historical periods. For the interior, common in current Western cultures include grates, fireguards, log boxes, andirons, bark baskets, along with fire puppies, all of which cradle fuel and accelerate burning. A grate (or fire grate) is a frame, usually of iron bars, to retain fuel for a fire. Heavy metal firebacks are occasionally utilized to catch and re-radiate warmth, to safeguard the back of the fireplace, and as decoration. Fenders are low metal frames placed in front of the fireplace to include embers, soot and ash. For fireplace tending, tools comprise pokers, bellows, tongs, shovels, brushes and instrument racks.

As time passes, the purpose of fireplaces has transformed from one of necessity to one of visual interest. Early ones were more fire pits than modern fireplaces. They were used for heat on cold days and nights, as well as for cooking. They also functioned as a gathering place within the home. These fire pits were generally centered within a space, allowing more individuals to gather around it.

Fireplace Mantel Designs Keeping the Space Warmth with Beautiful Decor Traba Homes

4 Easy Fireplace Mantel Decorating Ideas with Croscill

Many defects were found in early fireplace designs. The most famous fireplace designers of the period were the Adam Brothers. They perfected a style of fireplace design that has been used for generations. It was smaller, more brightly lit, with an emphasis on the level of the substances used in their construction, instead of their size.

By the 1800s newest fireplaces were composed of 2 components, the surround as well as the insert. The encircle comprised of the mantlepiece and sides supports, typically in wood, marble or granite. The insert was where the fire burnt, and was constructed of cast iron frequently backed with decorative tiles. In addition to providing warmth, the fireplaces of the Victorian era were thought to add a cozy ambiance into houses.

4 Easy Fireplace Mantel Decorating Ideas with Croscill Video

Some fireplace units incorporate a blower that transports more of the fireplace's heat to the atmosphere via convection, leading to a more evenly heated area and a decrease heating load. Fireplace efficiency can also be increased with the use of a fireback, a sheet of metal which sits behind the flame and reflects heat back into the room. Firebacks are traditionally produced from cast iron, but can also be made from stainless steel. Efficiency is a complicated concept although with open hearth fireplaces. Most efficacy tests consider only the impact of heating of the air. An open fireplace isn't, and never was, intended to heat the atmosphere. The best way to gauge the output of a fireplace is in case you notice you're turning the thermostat down or up.

Most elderly fireplaces have a comparatively low efficiency rating. Standard, contemporary, weatherproof masonry fireplaces still possess an efficiency rating of at least 80% (legal minimum necessity for example in Salzburg/Austria). To improve efficiency, fireplaces may also be modified by adding special heavy fireboxes designed to burn cleaner and can reach efficiencies as large as 80% in heating the air. These altered fireplaces are often equipped with a massive fire window, enabling an efficient heating system in two stages. During the first phase the initial heat is provided through a large glass window while the flame is burning. In this time the construction, built of refractory bricks, absorbs the warmth. This heat is then evenly radiated for many hours during the next stage. Masonry fireplaces without a glass fire window only offer heat radiated from its surface. Depending on temperatures 1 to 2 daily firings are sufficient to ensure a constant room temperature.fireplace mantel decor

30+ Amazing fall decorating ideas for your fireplace mantel

Historical fire pits were sometimes constructed in the ground, in caves, or in the center of a hut or home. Evidence of ancient, man-made flames exists on all five inhabited continents. The drawback of early indoor fire pits was that they generated toxic and/or annoying smoke within the dwelling.Fire pits grown into raised hearths in structures, but venting smoke relied on open windows or openings in roofs. The medieval great hall typically needed a centrally situated hearth, where a open fire burned with the smoke climbing into the vent in the roof. Louvers were developed during the Middle Ages to enable the roof vents to be covered so rain and snow would not enter.

Also throughout the Middle Ages, smoke canopies were invented to prevent smoke from spreading through an area and vent it outside through a ceiling or wall. These could be put against stone walls, instead of taking up the center of the space, and this allowed smaller rooms to be heated.Chimneys were invented in northern Europe from the 11th or 12th centuries and largely fixed the problem of fumes, more faithfully venting smoke outside. They made it possible to provide the fireplace a draft, and also made it possible to put fireplaces in multiple rooms in buildings handily. They didn't come into general usage instantly, however, since they were more expensive to build and maintain.

In 1678 Prince Rupert, nephew of Charles I, raised the grate of the fireplace, improving the airflow and venting system. The 18th century saw two important developments in the history of fireplaces. Benjamin Franklin developed a convection chamber for the fireplace which greatly enhanced the efficacy of fireplaces and wood stoves. He also enhanced the airflow by pulling air from a basement and venting a lengthier place on very top. In the later 18th century, Count Rumford designed a fireplace with a tall, shallow firebox that has been better at drawing up the smoke and from the building. The shallow design also improved greatly the quantity of radiant heat projected to the space. Rumford's layout is the basis for modern kitchens.

The Aesthetic movement of the 1870s and 1880s took on a more traditional spectra based on stone and also deflected unnecessary ornamentation. Instead it depended on simple designs with little unnecessary ornamentation. In the 1890s the Aesthetic movement gave way to the Arts and Crafts movement, where the emphasis was placed on providing quality gems. Stone fireplaces now have been a symbol of wealth, which to a degree is still the idea today.A fireplace is a structure made of brick, stone or metal made to contain a fire. Fireplaces are used for the relaxing ambiance that they create and for heating a space. Modern fireplaces vary in heat efficacy, based on the design.

Historically they have been used for heating a dwelling, cooking, and heating water for laundry and domestic uses.

Related Images with 30+ Amazing fall decorating ideas for your fireplace mantel

Adventures in Decorating: Summer Mantel

On the exterior there is often a corbeled brick crown, in which the casting courses of brick function as a drip route to keep rainwater from running down the exterior walls. A cap, hood, or shroud functions to keep rainwater from the exterior of the chimney; rain in the chimney is a far larger problem in chimneys lined with impervious flue tiles or metal liners than with the traditional masonry chimney, which divides up all but the most violent rain. Some chimneys have a spark arrestor integrated into the cap or crown.

Organizations like the United States Environmental Protection Agency and the Washington Department of Ecology warn that, according to various studies, fireplaces can pose a substantial health risk. The EPA writes"Smoke may smell great, but it's not great for you.

Kinds of fireplacesManufactured fireplaces are made out of sheet metal or glass flame boxes.Electric fireplaces could be built-in replacements for wood or gas or retrofit with log inserts or electrical fireboxes.

Masonry and prefabricated fireplaces can be fueled by wood, natural gas, biomass and gas fuel sources. In the USA, several states and local counties have laws restricting these kinds of fireplaces. They need to be properly sized to the area to be heated. Additionally, there are air quality management problems because of the quantity of moisture that they release in the room air, and oxygen sensor and carbon monoxide sensors are security essentials. Direct vent fireplaces have been fueled by either liquid propane or natural gas. They are completely sealed from the area that's heated, and port all exhaust gasses into the exterior of the structure.

From My Front Porch To Yours: How I Found My Style Sundays Adventures In Decorating

AccessoriesA vast range of accessories are used with fireplaces, which range between states, regions, and historical periods. For the inside, common in recent Western cultures include grates, fireguards, log boxes, andirons, bark baskets, and fire puppies, all of which cradle gas and quicken burning. A grate (or flame grate) is a framework, usually of iron bars, to retain fuel to your fire. Heavy metallic firebacks are occasionally utilized to catch and re-radiate warmth, to safeguard the back of the fireplace, and as decoration. Fenders are low metallic frames placed before the fireplace to include embers, soot and ashes.

Over time, the purpose of fireplaces has changed from one of requirement to one of visual interest. Early ones were more fire pits compared to modern fireplaces. They were used for warmth on chilly days and nights, in addition to for cooking. They also functioned as a gathering place within the home. These fire pits were generally centered within a room, allowing more individuals to gather around it.

Fireplace Mantel Decor Ideas for Decorating for Thanksgiving

Tips on Decorating the Fireplace Mantel Simplified Bee

Many defects were found in ancient fireplace designs. Together with the Industrial Revolution, came big scale housing developments, requiring a standardization of fireplaces. The most famous fireplace designers of this time were the Adam Brothers. They perfected a style of fireplace design which has been used for generations. It had been smaller, more brightly lit, with an emphasis on the quality of the materials used in their construction, instead of their dimensions.

From the 1800s most new fireplaces were made up of two components, the surround and the add. The surround comprised of the mantlepiece and sides affirms, typically in wood, marble or granite. The fit was fire burned, and was constructed of cast iron often backed with decorative tiles. In addition to providing heat, the fireplaces of the Victorian era were believed to bring a cozy ambiance to homes.

Tips on Decorating the Fireplace Mantel Simplified Bee Video

Some fireplace components include a blower that transfers more of the fireplace's heat to the atmosphere via convection, leading to a more evenly heated area and a lower heating load. Fireplace efficiency can also be enhanced by means of a fireback, a piece of metal that sits behind the flame and reflects heat back into the room. Firebacks are traditionally produced from cast iron, but are also manufactured from stainless steel. Efficiency is a complex notion though with open hearth fireplaces. Most efficacy tests consider only the effect of heating of the air. An open fireplace isn't, and never was, intended to heat the atmosphere. A fireplace with a fireback is a radiant heater, and has done so since the 15th century. The best way to gauge the output signal of a fireplace is in case you detect you're turning the thermostat down or up.

Most elderly fireplaces have a relatively low efficiency score. Standard, modern, wood-burning masonry fireplaces though have an efficiency rating of 80% (legal minimum necessity for example in Salzburg/Austria). To boost efficiency, fireplaces can also be modified by adding special heavy fireboxes designed to burn much cleaner and can reach efficiencies as large as 80% in heating the air. These altered fireplaces are often equipped with a large fire window, enabling an efficient heating system in two phases. During the first phase the initial heat is offered through a large glass window while the fire is burning. During this time the structure, built of refractory bricks, absorbs the heat. This warmth is then evenly radiated for many hours during the next stage. Masonry fireplaces with no glass fire window just offer heat radiated from the surface. Based on temperatures 1 to two daily firings are sufficient to ensure a constant room temperature.fireplace mantel decor

Best 25+ Mantle decorating ideas on Pinterest Fire place mantel decor, Fireplace mantel

Ancient fire pits were sometimes constructed from the floor, within caves, or in the middle of a hut or dwelling. Evidence of ancient, man-made fires exists on all five inhabited continents. The drawback of early indoor fire pits was that they generated toxic and/or annoying smoke within the house.Fire pits developed into elevated hearths in structures, but venting smoke depended on open windows or openings in roofs. The great hall typically had a centrally situated hearth, where a open flame burnt with the smoke rising to the port in the roof. Louvers were developed during the Middle Ages to enable the roof vents to be covered so snow and rain would not enter.

Additionally during the Middle Ages, smoke canopies were invented to prevent smoke from dispersing an area and vent it outside through a ceiling or wall. These could be put against rock walls, rather than taking up the center of the space, and this allowed smaller rooms to be warmed.Chimneys were devised in northern Europe from the 11th or 12th centuries and largely fixed the problem of fumes, more reliably venting smoke outside. They made it possible to provide the fireplace a draft, and made it feasible to place fireplaces in multiple rooms in buildings conveniently. They didn't come into general usage immediately, however, as they were expensive to develop and maintain.

The 18th century saw two major developments in the history of fireplaces. Benjamin Franklin developed a convection chamber for the fireplace that greatly improved the efficacy of fireplaces and wood stoves. In addition, he enhanced the airflow by pulling air from a basement and venting out a longer area at the top. In the later 18th century, Count Rumford made a fireplace using a tall, shallow firebox which was better at drawing the smoke up and from the construction. The shallow design also improved greatly the quantity of radiant heat projected into the space. Rumford's layout is the basis for modern kitchens.

The Aesthetic movement of the 1870s and 1880s took on a more conventional spectra based on stone and deflected unnecessary ornamentation. Rather it depended on simple designs with small unnecessary ornamentation. From the 1890s the Aesthetic movement gave way to the Arts and Crafts movement, where the emphasis was placed on supplying quality gems. Stone fireplaces now were a symbol of wealth, which to some degree remains the idea today.A fireplace is a construction made of brick, stone or metal made to contain a fire. Fireplaces are used for its relaxing ambiance they create and also for heating a room. Modern fireplaces vary in heat efficacy, depending upon the design.

Historically they have been used for heating a dwelling, cooking, and heating water for domestic and laundry uses. A fireplace might have the following: a base, a hearth, a firebox, a mantelpiece; a chimney crane (utilized in kitchen and laundry fireplaces), a grate, a lintel, a lintel bar, house overmantel, a damper, a smoke room, a neck, a flue, and a chimney filter or afterburner.

Related Images with Best 25+ Mantle decorating ideas on Pinterest Fire place mantel decor, Fireplace mantel

Decorating Your Mantelpiece for Spring

On the exterior there's frequently a corbeled brick crown, in which the casting courses of brick function as a drip course to keep rainwater from running down the outside walls. A cap, hood, or shroud serves to keep rainwater out of the exterior of the chimney; rain at the chimney is a far larger problem in chimneys lined with impervious flue tiles or metallic liners compared with the standard masonry chimney, that soaks up all but the rain. Some chimneys have a spark arrestor integrated into the crown or cap.

Organizations like the United States Environmental Protection Agency and the Washington Department of Ecology warn that, according to different studies, fireplaces can pose a substantial health risk. The EPA writes"Smoke may smell good, but it's not good for you.

Kinds of fireplacesArtificial fireplaces are made out of sheet glass or metal flame boxes.Electric fireplaces can be built-in replacements for wood or gas or retrofit with log inserts or electric fireboxes.A couple of kinds are, wall mounted electric fireplaces, electric fireplace stoves, electric mantel fireplaces and fixed or free standing gas fireplaces.

Ventless Fireplaces (duct free/room-venting fireplaces) are fueled by either gel, liquid propane, bottled gas or natural gas. In the USA, several states and local businesses have laws limiting these types of fireplaces. Additionally, there are air quality management problems because of the quantity of moisture they release into the room atmosphere, and oxygen sensor and carbon monoxide sensors are security essentials. Direct vent fireplaces have been fueled by liquid propane or natural gas. They are totally sealed from the place that's heated, and port all exhaust gasses to the outside of the structure.

Fireplace Decorating Houzz

AccessoriesFor the interior, common in recent Western civilizations comprise grates, fireguards, log boxes, andirons, bark baskets, along with fire puppies, all which cradle gas and quicken burning. A grate (or fire grate) is a framework, usually of iron bars, to maintain fuel to your fire. Heavy metallic firebacks are sometimes used to catch and re-radiate heat, to safeguard the rear of the fireplace, and as decoration. Fenders are low metal frames placed in front of the fireplace to include embers, soot and ash. For fireplace tending, tools include pokers, bellows, tongs, shovels, brushes and instrument stands. Other wider accessories can include log baskets, companion sets, coal buckets, cabinet accessories and much more.

As time passes, the purpose of fireplaces has transformed from one of requirement to one of visual interest. Early ones were fire pits compared to contemporary fireplaces. They were used for heat on cold days and nights, as well as for cooking. They also served as a gathering place within the home. These fire pits were usually based within a room, allowing more individuals to collect around it.

25+ best ideas about Fireplace Mantel Decorations on Pinterest Mantle decorating, Mantels

25+ best ideas about Over fireplace decor on Pinterest Fireplace mantel decorations, Mantels

Many flaws were found in early fireplace designs. Along with the Industrial Revolution, came big scale housing developments, necessitating a standardization of fireplaces. The most famous fireplace performers of the time were the Adam Brothers. They perfected a style of fireplace design that has been used for generations. It had been smaller, more brightly lit, with a emphasis on the level of the materials used in their construction, instead of their dimensions.

From the 1800s most new fireplaces were composed of two components, the surround as well as the add. The surround consisted of the mantlepiece and sides affirms, usually in wood, granite or marble. The insert was fire burnt, and was built of cast iron often backed with ornamental tiles. As well as providing heat, the fireplaces of the Victorian age were thought to bring a cozy ambiance into houses.

25+ best ideas about Over fireplace decor on Pinterest Fireplace mantel decorations, Mantels Video

Some fireplace units incorporate a blower that transports more of the fireplace's heat to the air via convection, leading to a more evenly heated space and a decrease heating load. Fireplace efficiency can also be increased by means of a fireback, a piece of metal which sits behind the flame and reflects heat back into the room. Firebacks are traditionally produced from cast iron, but are also manufactured from stainless steel. Efficiency is a complicated concept although with open hearth fireplaces. Most efficiency tests consider only the impact of heating of the atmosphere. An open fireplace is not, and never was, designed to heat the air. The best method to estimate the output signal of a fireplace is if you notice you are turning the thermostat down or up.

Most older fireplaces have a relatively low efficiency score. Standard, contemporary, weatherproof masonry fireplaces though have an efficiency rating of 80% (legal minimum necessity for example in Salzburg/Austria). To improve efficiency, fireplaces may also be altered by inserting special heavy fireboxes designed to burn cleaner and can reach efficiencies as large as 80% in heating the atmosphere. These modified fireplaces are usually equipped with a massive fire window, enabling an efficient heating system in two stages. During the first stage the initial heat is offered through a big glass while the fire is burning. During this time period the construction, built of refractory bricks, absorbs the warmth. This warmth is then equally radiated for several hours during the next stage. Masonry fireplaces with no glass fire window just offer heat radiated from the surface. Depending on temperatures 1 to two daily firings are sufficient to ensure a constant room temperature.fireplace decor

Best 25+ Fall fireplace decor ideas on Pinterest Fall mantle decor, Fire place mantel decor

Historical fire pits were sometimes constructed from the floor, in caves, or at the middle of a hut or dwelling. Evidence of ancient, man-made flames exists on all five inhabited continents. The disadvantage of premature indoor flame pits was that they generated toxic and/or annoying smoke within the dwelling.Fire pits grown into elevated hearths in buildings, but ventilation smoke relied on open windows or openings in roofs. The medieval great hall typically had a centrally situated hearth, where an open fire burnt with the smoke climbing into the vent in the roof. Louvers were developed during the Middle Ages to allow the roof vents to be covered so snow and rain wouldn't enter.

Additionally during the Middle Ages, smoke canopies were invented to stop smoke from spreading through a room and vent it outside via a ceiling or wall. These could be put against stone walls, instead of taking up the center of the space, and this allowed smaller chambers to be heated.Chimneys were devised in northern Europe in the 11th or 12th centuries and mostly fixed the issue of fumes, more faithfully venting smoke outside. They made it possible to provide the fireplace a draft, and made it possible to put fireplaces in numerous rooms in buildings handily. They did not come into general usage immediately, however, as they were expensive to build and maintain.

Benjamin Franklin developed a convection room for the fireplace which greatly improved the efficacy of fireplaces and wood stoves. He also improved the airflow by pulling air from a basement and venting out a longer place on top. In the later 18th century, Count Rumford made a fireplace with a tall, shallow firebox that has been better at drawing up the smoke and out of the construction. The shallow design also improved greatly the quantity of radiant warmth projected to the room. Rumford's layout is the basis for modern fireplaces.

Rather it depended on simple designs with small unnecessary ornamentation. In the 1890s the Aesthetic movement gave way into the Arts and Crafts movement, in which the emphasis was placed on supplying quality stone. Stone fireplaces at this time have been a symbol of wealth, which to some degree remains the notion today.A fireplace is a construction made of brick, stone or metal made to include a fire. Fireplaces are utilized for its relaxing ambiance that they create and for heating a room. Modern fireplaces vary in heat efficacy, based on the plan.

Historically they were used for heating a dwelling, cooking, and heating water for laundry and domestic uses. A fire is contained in a firebox or firepit; a chimney or other flue allows exhaust to escape.

Related Images with Best 25+ Fall fireplace decor ideas on Pinterest Fall mantle decor, Fire place mantel decor

Best 25+ Fireplace mantel decorations ideas on Pinterest Mantle decorating, Fire place decor

On the exterior there is frequently a corbeled brick crown, where the casting courses of brick function as a drip route to keep rainwater from running down the exterior walls. A cap, hood, or shroud serves to keep rainwater from the exterior of the chimney; rain in the chimney is a much larger problem in chimneys lined with impervious flue tiles or metallic liners than with the traditional masonry chimney, which soaks up all but the rain. A few chimneys have a spark arrestor incorporated into the crown or cap.

Organizations like the United States Environmental Protection Agency and the Washington Department of Ecology warn that, according to different studies, fireplaces could pose a significant health threat. The EPA writes"Smoke may smell great, but it's not great for you.

Kinds of fireplacesArtificial fireplaces are made out of sheet metal or glass fire boxes.Electric fireplaces can be built-in replacements for gas or wood or retrofit with log inserts or electric fireboxes.

Masonry and prefabricated fireplaces can be fueled by wood, natural gas, biomass and propane fuel sources. In the United States, several states and local businesses have laws restricting these types of fireplaces. Additionally, there are air quality management problems due to the quantity of moisture they discharge in the room atmosphere, and oxygen sensor and carbon dioxide sensors are safety essentials. Direct vent fireplaces are fueled by either liquid propane or natural gas. They are completely sealed from the place that is heated, and vent all exhaust gasses into the outside of the structure.

Fireplace Mantel Decorating Better Homes Gardens

AccessoriesA wide assortment of accessories are used with fireplaces, ranging between countries, regions, and historical periods. For the interior, common in recent Western civilizations include grates, fireguards, log boxes, andirons, bark baskets, and fire puppies, all which cradle fuel and accelerate burning. A grate (or fire grate) is a frame, usually of iron bars, to maintain fuel for a fire. Heavy metallic firebacks are occasionally utilized to catch and re-radiate warmth, to safeguard the back of the fireplace, and as decoration. Fenders are low metal frames placed before the fireplace to contain embers, soot and ashes. For fireplace tending, tools comprise pokers, bellows, tongs, shovels, brushes and tool racks. Other wider accessories may include log baskets, companion sets, coal buckets, cabinet accessories and more.

As time passes, the purpose of fireplaces has transformed from one of necessity to one of interest. Early ones were more fire pits compared to contemporary fireplaces. They have been used for heat on cold days and nights, as well as for cooking. They also functioned as a gathering place within the home. These fire pits were generally centered within a room, allowing more people to gather around it.

Tips on Decorating the Fireplace Mantel Simplified Bee

*Riches to Rags* by Dori: Fireplace Mantel Decorating Ideas!

Many flaws were found in ancient fireplace designs. The most famous fireplace performers of this time were the Adam Brothers. They perfected a kind of fireplace design that has been used for generations. It had been smaller, more brightly colored, with an emphasis on the quality of the substances used in their construction, as opposed to their dimensions.

By the 1800s newest fireplaces were made up of 2 parts, the surround as well as the insert. The surround consisted of the mantlepiece and sides supports, usually in wood, granite or marble. The fit was fire burned, and was built of cast iron frequently backed with decorative tiles. In addition to providing warmth, the fireplaces of the Victorian age were thought to add a cozy ambiance into homes.

*Riches to Rags* by Dori: Fireplace Mantel Decorating Ideas! Video

Some fireplace components incorporate a blower that transports more of the fireplace's heat to the air via convection, resulting in a more evenly heated area and a decrease heating load. Fireplace efficiency can also be increased by means of a fireback, a piece of metal that sits behind the flame and reflects heat back into the room. Firebacks are traditionally made from cast iron, but are also manufactured from stainless steel. Efficiency is a complicated concept although with open hearth fireplaces. Most efficacy tests consider just the impact of heating of the air. An open fireplace is not, and never was, intended to heat the air. The ideal method to gauge the output signal of a fireplace is in case you detect you're turning the thermostat up or down.

Most older fireplaces have a comparatively low efficiency score. Standard, modern, wood-burning masonry fireplaces still possess an efficiency rating of at least 80% (legal minimum necessity such as in Salzburg/Austria). To improve efficiency, fireplaces may also be modified by inserting special heavy fireboxes developed to burn cleaner and can reach efficiencies as high as 80 percent in heating the atmosphere. These modified fireplaces are usually equipped with a large fire window, allowing an efficient heating process in two stages. During the first stage the first heat is provided through a large glass while the flame is burning. During this time period the structure, built of refractory bricks, absorbs the heat. This warmth is then equally radiated for many hours during the next phase. Masonry fireplaces with no glass fire window only provide heat radiated from its surface. Depending on outside temperatures 1 to two daily firings are sufficient to guarantee a constant room temperature.fireplace mantel decor

White and Green Mantel Garland Flower, Fireplace mantels and Mantles decor

Historical fire pits were sometimes built in the floor, in caves, or in the center of a hut or home. Evidence of ancient, man-made flames exists on all five inhabited continents. The disadvantage of early indoor flame pits was that they generated hazardous or irritating smoke within the dwelling.Fire pits grown into raised hearths in structures, but venting smoke depended on open windows or holes in roofs. The great hall typically had a centrally situated hearth, where an open flame burned with all the smoke rising to the vent in the roof. Louvers were developed during the Middle Ages to enable the roof vents to be covered so snow and rain wouldn't enter.

Also throughout the Middle Ages, smoke canopies were invented to prevent smoke from dispersing an area and vent it out via a ceiling or wall. These could be put against stone walls, instead of taking up the center of the space, and this enabled smaller chambers to be warmed.Chimneys were devised in northern Europe from the 11th or 12th centuries and mostly fixed the problem of fumes, more reliably venting smoke outside. They made it possible to give the fireplace a draft, and also made it feasible to place fireplaces in multiple rooms in buildings handily. They did not come into general use immediately, however, as they were expensive to build and maintain.

The 18th century saw two major developments in the history of fireplaces. Benjamin Franklin developed a convection room for the fireplace which greatly improved the efficiency of fireplaces and wood stoves. He also improved the airflow by pulling air from a basement and venting out a longer place at the top. In the later 18th century, Count Rumford made a fireplace using a tall, shallow firebox which was better at drawing up the smoke and out of the building. The shallow design improved greatly the quantity of radiant warmth projected into the room. Rumford's design is the foundation for modern kitchens.

Rather it relied on simple layouts with small unnecessary ornamentation. From the 1890s the Aesthetic movement gave way to the Arts and Crafts movement, in which the emphasis was placed on supplying quality gems. Stone fireplaces now have been a sign of wealth, which to a degree remains the notion today.A fireplace is a construction made from brick, stone or metal designed to contain a fire. Fireplaces are utilized for the relaxing ambiance they create and also for heating a room. Modern fireplaces vary in heat efficacy, based on the design.

Historically they were used for heating a home, cooking, and heating water for laundry and domestic uses. A fireplace may have the following: a base, a hearth, a firebox, a mantelpiece; a chimney crane (utilized in kitchen and laundry fireplaces), a grate, a lintel, a lintel bar, home overmantel, a damper, a smoke chamber, a throat, a flue, and a chimney filter or afterburner.

Related Images with White and Green Mantel Garland Flower, Fireplace mantels and Mantles decor

7 Gorgeously Easy Fireplace Decor Ideas BetterDecoratingBibleBetterDecoratingBible

On the exterior there is often a corbeled brick crown, in which the projecting courses of brick function as a drip course to keep rainwater from running down the exterior walls. A cap, hood, or shroud functions to keep rainwater from the exterior of the chimney; rain at the chimney is a far greater difficulty in chimneys lined with impervious flue tiles or metal liners than with the standard masonry chimney, which divides up all but the rain. Some chimneys have a spark arrestor integrated into the cap or crown.

Organizations like the United States Environmental Protection Agency and the Washington Department of Ecology warn that, according to different studies, fireplaces could pose a significant health threat. The EPA writes"Smoke may smell good, but it is not good for you.

Types of fireplacesManufactured fireplaces are made out of sheet metal or glass flame boxes.Electric fireplaces could be built-in replacements for gas or wood or retrofit with log inserts or electrical fireboxes.

Masonry and prefabricated fireplaces can be fueled by wood, natural gas, biomass and gas fuel sources. In the USA, several states and local counties have laws limiting these kinds of fireplaces. There are also air quality management problems because of the quantity of moisture they release into the room air, and oxygen detector and carbon monoxide sensors are safety essentials. Direct vent fireplaces are fueled by either liquid propane or natural gas. They are completely sealed from the area that's heated, and vent all exhaust gasses into the exterior of the structure.

Best 25+ Mirror above fireplace ideas on Pinterest Mirror above couch, 3 mirrors above couch

AccessoriesFor the inside, common in recent Western civilizations include grates, fireguards, log boxes, andirons, pellet baskets, along with fire dogs, all of which cradle gas and quicken burning. A grate (or flame grate) is a frame, usually of iron bars, to maintain fuel for a fire. Heavy metallic firebacks are occasionally utilized to catch and re-radiate heat, to safeguard the rear of the fireplace, and as decoration. Fenders are low metal frames placed before the fireplace to include embers, soot and ashes. Other wider accessories may include log baskets, companion sets, coal buckets, cabinet accessories and more.

As time passes, the intent behind fireplaces has transformed from one of requirement to one of visual interest. Early ones were more fire pits than modern fireplaces. They have been used for heat on chilly days and nights, in addition to for cooking. They also served as a gathering place within the house. These fire pits were generally based within a room, allowing more individuals to gather around it.

Decorating Ideas for Fireplace Mantels and Walls DIY

211 best images about Mantel Hearth Decorating on Pinterest Mantels, Mantles and Decorating

Many defects were found in early fireplace designs. Together with the Industrial Revolution, came large scale housing developments, necessitating a standardization of fireplaces. The most renowned fireplace performers of this time were the Adam Brothers. They perfected a kind of fireplace design that was used for generations. It had been smaller, more brightly colored, with an emphasis on the level of the materials used in their construction, as opposed to their dimensions.

By the 1800s most new fireplaces were composed of two parts, the surround and the add. The surround comprised of the mantlepiece and sides supports, usually in wood, marble or granite. The insert was where the fire burned, and was built of cast iron often backed with decorative tiles. In addition to providing heat, the fireplaces of the Victorian age were believed to add a cozy ambiance to houses.

211 best images about Mantel Hearth Decorating on Pinterest Mantels, Mantles and Decorating Video

Some fireplace components incorporate a blower that transports more of the fireplace's heat to the atmosphere via convection, leading to a more evenly heated area and a lower heating load. Fireplace efficiency is also increased with the use of a fireback, a piece of metal that sits behind the flame and reflects heat back into the room. Firebacks are traditionally made from cast iron, but can also be manufactured from stainless steel. Efficiency is a complex concept though with open hearth fireplaces. Most efficiency tests consider just the effect of heating of the atmosphere. An open fireplace is not, and never was, intended to heat the air. A fireplace with a fireback is a radiant heater, and has done so as the 15th century. The ideal way to estimate the output signal of a fireplace is if you detect you're turning the thermostat up or down.

Most older fireplaces have a relatively low efficiency score. Standard, modern, wood-burning masonry fireplaces though have an efficiency rating of 80% (legal minimum necessity for example in Salzburg/Austria). To improve efficiency, fireplaces can also be altered by inserting special heavy fireboxes developed to burn much cleaner and can reach efficiencies as large as 80 percent in heating the air. These modified fireplaces are usually equipped with a large fire window, enabling an efficient heating process in two stages. During the first stage the first heat is offered through a large glass window while the flame is burning. During this time the structure, constructed of refractory bricks, absorbs the heat. This heat is then evenly radiated for many hours during the next phase. Masonry fireplaces with no glass fire window just provide heat radiated from the surface. Based on outside temperatures 1 to two daily firings are enough to ensure a constant room temperature.fireplace decor

7 best images about Fireplace mantel decor on Pinterest Wedding fireplace, A well and Mantels

Historical fire pits were sometimes built from the ground, in caves, or at the middle of a hut or home. Evidence of ancient, man-made flames exists on all five inhabited continents. The disadvantage of premature indoor flame pits was that they produced toxic and/or irritating smoke within the house.Fire pits developed into raised hearths in buildings, but venting smoke relied on open windows or openings in roofs. The great hall typically had a centrally located hearth, where an open flame burned with all the smoke rising to the port in the roof. Louvers were developed during the Middle Ages to allow the roof vents to be coated so snow and rain wouldn't enter.

Also throughout the Middle Ages, smoke canopies were invented to prevent smoke from spreading through a room and vent it outside through a ceiling or wall. These can be put against stone walls, instead of taking up the center of the space, and this allowed smaller rooms to be heated.Chimneys were devised in northern Europe from the 11th or 12th centuries and mostly fixed the problem of fumes, more reliably venting smoke outside. They made it feasible to provide the fireplace a draft, and also made it possible to put fireplaces in multiple rooms in buildings handily. They did not come into general usage immediately, however, since they were expensive to develop and maintain.

In 1678 Prince Rupert, nephew of Charles I, raised the grate of the fireplace, improving the airflow and venting system. Benjamin Franklin developed a convection room for the fireplace which greatly improved the efficacy of fireplaces and wood stoves. In addition, he enhanced the airflow by pulling air from a cellar and venting out a longer place at the top. At the later 18th century, Count Rumford made a fireplace using a tall, shallow firebox which has been better at drawing the smoke up and out of the construction. The shallow design also improved greatly the amount of radiant heat projected to the room. Rumford's layout is the basis for modern fireplaces.

The Aesthetic movement of the 1870s and 1880s took to a more traditional spectra based on stone and deflected unnecessary ornamentation. Instead it depended on simple layouts with small unnecessary ornamentation. In the 1890s the Aesthetic movement gave way into the Arts and Crafts movement, where the emphasis was placed on supplying quality gems. Stone fireplaces now were a sign of prosperity, which to a degree remains the notion today.A fireplace is a structure made of brick, stone or metal designed to contain a fire. Fireplaces are utilized for its relaxing ambiance that they create and also for heating a room. Modern fireplaces vary in heat efficiency, depending on the design.

Historically they have been utilized for heating a home, cooking, and heating water for laundry and domestic uses. A fireplace might have the following: a foundation, a hearth, a firebox, a mantelpiece; a chimney (used in laundry and kitchen fireplaces), a grate, a lintel, a lintel pub, house overmantel, a damper, a smoke room, a throat, a flue, and a chimney filter or afterburner.

Related Images with 7 best images about Fireplace mantel decor on Pinterest Wedding fireplace, A well and Mantels

Tips to Make Fireplace Mantel Décor for a Wedding Day MidCityEast

On the exterior there's often a corbeled brick crown, in which the casting courses of brick function as a drip course to keep rainwater from running down the exterior walls. A hood, cap, or shroud functions to keep rainwater from the exterior of the chimney; rain at the chimney is a far larger problem in chimneys lined with impervious flue tiles or metal liners compared with the standard masonry chimney, that soaks up all but the most violent rain. A few chimneys have a spark arrestor integrated into the crown or cap.

Organizations such as the United States Environmental Protection Agency and the Washington Department of Ecology warn that, according to various studies, fireplaces could pose a significant health risk. The EPA writes"Smoke may smell good, but it is not great for you.

Kinds of fireplacesArtificial fireplaces are made with sheet glass or metal fire boxes.Electric fireplaces could be built-in replacements for gas or wood or retrofit with log inserts or electric fireboxes.

Ventless Fireplaces (duct free/room-venting fireplaces) are fueled by either gel, liquid propane, bottled gas or natural gas. In the United States, several states and local businesses have laws limiting these types of fireplaces. They need to be properly sized to the area to be heated. Additionally, there are air quality control issues because of the quantity of moisture that they release into the room atmosphere, and oxygen sensor and carbon monoxide sensors are safety essentials. Direct vent fireplaces have been fueled by liquid propane or natural gas. They are totally sealed from the area that is heated, and port all exhaust gasses to the outside of the structure.

Adventures in Decorating: Our Simple Fall Mantel

AccessoriesFor the inside, common in current Western cultures comprise grates, fireguards, log boxes, andirons, bark baskets, and fire dogs, all of which cradle gas and quicken burning. A grate (or flame grate) is a framework, usually of iron bars, to retain fuel to your fire. Heavy metal firebacks are occasionally utilized to capture and re-radiate heat, to safeguard the rear of the fireplace, and as decoration. Fenders are low metal frames placed in front of the fireplace to include embers, soot and ashes. For fireplace tending, tools include pokers, bellows, tongs, shovels, brushes and instrument racks.

As time passes, the purpose of fireplaces has changed from one of necessity to one of interest. Early ones were fire pits than modern fireplaces. They were used for heat on chilly days and nights, in addition to for cooking. They also served as a gathering place inside the house. These fire pits were generally based within a space, allowing more people to collect around it.

30+ Amazing fall decorating ideas for your fireplace mantel

25 Cozy Ideas for Fireplace Mantels Southern Living

Many flaws were found in ancient fireplace designs. Along with the Industrial Revolution, came large scale housing developments, requiring a standardization of fireplaces. The most famous fireplace designers of this period were the Adam Brothers. They perfected a style of fireplace design which has been used for generations. It was smaller, more brightly colored, with a emphasis on the quality of the substances used in their construction, instead of their dimensions.

By the 1800s most new fireplaces were made up of two components, the surround as well as the add. The surround comprised of the mantlepiece and sides affirms, typically in wood, marble or granite. The insert was where the fire burned, and was built of cast iron frequently backed with decorative tiles. In addition to providing heat, the fireplaces of the Victorian era were believed to bring a cozy ambiance to homes.

25 Cozy Ideas for Fireplace Mantels Southern Living Video

Some fireplace components incorporate a blower which transfers more of the fireplace's heat to the air via convection, resulting in a more evenly heated space and a decrease heating load. Fireplace efficiency can also be enhanced with the use of a fireback, a piece of metal which sits behind the flame and reflects heat back into the room. Firebacks are traditionally produced from cast iron, but are also made from stainless steel. Efficiency is a complicated notion though with open hearth fireplaces. Most efficacy tests consider just the effect of heating of the atmosphere. An open fireplace isn't, and never was, intended to warm the air. A fireplace with a fireback is a radiant heater, and has done so since the 15th century. The best way to estimate the output of a fireplace is in case you detect you're turning the thermostat up or down.

Most older fireplaces have a comparatively low efficiency rating. Standard, modern, wood-burning masonry fireplaces though have an efficiency rating of at least 80% (legal minimum necessity such as in Salzburg/Austria). To improve efficiency, fireplaces can also be altered by adding special heavy fireboxes designed to burn much cleaner and may reach efficiencies as high as 80 percent in heating the air. These altered fireplaces are usually equipped with a massive fire window, allowing an efficient heating system in two phases. During the first stage the first heat is provided through a big glass window while the flame is burning. During this time period the structure, constructed of refractory bricks, absorbs the warmth. This warmth is then equally radiated for many hours during the second stage. Masonry fireplaces with no glass fire window just offer heat radiated from its surface. Depending on temperatures 1 to 2 daily firings are enough to ensure a constant room temperature.fireplace mantel decor

30+ Amazing fall decorating ideas for your fireplace mantel

Ancient fire pits were sometimes built in the floor, in caves, or in the middle of a hut or home. Evidence of prehistoric, man-made flames is present on all five inhabited continents. The drawback of premature indoor flame pits was that they generated hazardous or annoying smoke within the house.Fire pits developed into raised hearths in buildings, but venting smoke depended on open windows or openings in roofs. The medieval great hall typically had a centrally situated hearth, where a open flame burnt with the smoke climbing into the vent in the roof. Louvers were developed throughout the Middle Ages to allow the roof vents to be coated so snow and rain wouldn't enter.

Additionally throughout the Middle Ages, smoke canopies were invented to prevent smoke from dispersing an area and vent it out through a wall or roof. These could be put against rock walls, instead of taking up the middle of the space, and this allowed smaller rooms to be warmed.Chimneys were devised in northern Europe in the 11th or 12th centuries and largely fixed the problem of fumes, more reliably venting smoke outside. They made it possible to give the fireplace a draft, and also made it possible to place fireplaces in numerous rooms in buildings conveniently. They didn't come into general usage immediately, however, as they were expensive to develop and maintain.

In 1678 Prince Rupert, nephew of Charles I, raised the grate of the fireplace, improving the airflow and venting system. The 18th century saw two important developments in the history of fireplaces. Benjamin Franklin developed a convection chamber for the fireplace that greatly improved the efficiency of fireplaces and wood stoves. He also enhanced the airflow by pulling air from a basement and venting out a lengthier area on top. In the later 18th century, Count Rumford designed a fireplace with a tall, shallow firebox which has been better at drawing up the smoke and from the construction. The shallow design improved greatly the amount of radiant heat projected to the space. Rumford's design is the foundation for modern kitchens.

The Aesthetic movement of the 1870s and 1880s took to a more conventional spectra based on stone and deflected unnecessary ornamentation. Rather it relied on simple layouts with little unnecessary ornamentation. From the 1890s the Aesthetic movement gave way to the Arts and Crafts movement, in which the emphasis was still placed on providing quality gems. Stone fireplaces now have been a sign of wealth, which to a degree remains the notion today.A fireplace is a construction made of brick, stone or metal designed to include a fire. Fireplaces are utilized for the relaxing ambiance they create and for heating a space. Modern fireplaces vary in heat efficacy, depending on the design.

Historically they have been utilized for heating a dwelling, cooking, and heating water for laundry and domestic uses. A fireplace might have the following: a base, a hearth, a firebox, a mantelpiece; a chimney crane (used in laundry and kitchen fireplaces), a grate, a lintel, a lintel bar, house overmantel, a damper, a smoke room, a neck, a flue, and a chimney filter or afterburner.

Related Images with 30+ Amazing fall decorating ideas for your fireplace mantel

Fireplace Mantel Decor Not JUST A Housewife

On the exterior there is often a corbeled brick crown, where the projecting courses of brick function as a drip route to keep rainwater from running down the outside walls. A hood, cap, or shroud functions to keep rainwater out of the outside of the chimney; rain in the chimney is a much greater difficulty in chimneys lined with impervious flue tiles or metal liners than with the traditional masonry chimney, that divides up all but the rain. Some chimneys have a spark arrestor integrated into the cap or crown.

The EPA writes"Smoke may smell good, but it is not good for you.

Types of fireplacesManufactured fireplaces are made with sheet metal or glass fire boxes.Electric fireplaces can be built-in replacements for either wood or gas or retrofit with log inserts or electrical fireboxes.A couple of kinds are, wall mounted electric fireplaces, electric fireplace stoves, electrical mantel fireplaces and fixed or free standing electric fireplaces.

Ventless Fireplaces (duct free/room-venting fireplaces) are fueled by either gel, liquid propane, bottled gas or natural gas. In the United States, some states and local businesses have laws limiting these kinds of fireplaces. Additionally, there are air quality control issues because of the quantity of moisture they release into the room atmosphere, and oxygen sensor and carbon monoxide sensors are security essentials. Direct vent fireplaces are fueled by either liquid propane or natural gas. They are completely sealed in the place that is heated, and port all exhaust gasses into the exterior of the structure.

Fireplace Mantel Decorating Better Homes Gardens

AccessoriesFor the interior, common in current Western civilizations include grates, fireguards, log boxes, andirons, bark baskets, and fire puppies, all which cradle gas and quicken burning. A grate (or flame grate) is a frame, usually of iron bars, to maintain fuel to your fire. Heavy metallic firebacks are occasionally utilized to catch and re-radiate warmth, to protect the rear of the fireplace, and as decoration. Fenders are low metallic frames placed in front of the fireplace to contain embers, soot and ash. For fireplace tending, tools comprise pokers, bellows, tongs, shovels, brushes and tool racks. Other wider accessories can include log baskets, companion sets, coal buckets, cabinet accessories and much more.

Over time, the purpose of fireplaces has transformed from one of requirement to one of visual interest. Early ones were fire pits than contemporary fireplaces. They have been used for heat on chilly days and nights, as well as for cooking. They also served as a gathering place inside the home. These fire pits were usually centered within a room, allowing more people to collect around it.

Decorate Your Mantel Year Round HGTV

25+ best ideas about Fireplace Mantel Decorations on Pinterest Mantle decorating, Mantels

Many defects were found in early fireplace designs. The most renowned fireplace designers of the time were the Adam Brothers. They perfected a style of fireplace design which has been used for generations. It had been smaller, more brightly colored, with a emphasis on the quality of the substances used in their construction, instead of their size.

From the 1800s newest fireplaces were composed of two parts, the surround and the add. The encircle consisted of the mantlepiece and sides supports, usually in wood, marble or granite. The fit was fire burned, and was built of cast iron often backed with ornamental tiles. As well as providing warmth, the fireplaces of the Victorian era were thought to bring a cozy ambiance into houses.

25+ best ideas about Fireplace Mantel Decorations on Pinterest Mantle decorating, Mantels Video

Some fireplace components incorporate a blower which transports more of the fireplace's heat to the air via convection, leading to a more evenly heated area and a decrease heating load. Fireplace efficiency is also enhanced with the use of a fireback, a sheet of metal which sits behind the fire and reflects heat back into the room. Firebacks are traditionally produced from cast iron, but are also made from stainless steel. Efficiency is a complex notion though with open hearth fireplaces. Most efficiency tests consider only the impact of heating of the air. An open fireplace isn't, and never was, intended to heat the atmosphere. A fireplace with a fireback is a toaster, and has done so as the 15th century. The best way to estimate the output of a fireplace is if you detect you're turning the thermostat up or down.

Most elderly fireplaces have a comparatively low efficiency score. Standard, modern, wood-burning masonry fireplaces still possess an efficiency rating of 80% (legal minimum requirement for example in Salzburg/Austria). To boost efficiency, fireplaces can also be altered by inserting special heavy fireboxes developed to burn cleaner and may reach efficiencies as high as 80% in heating the atmosphere. These altered fireplaces are usually equipped with a massive fire window, enabling an efficient heating process in two stages. During the first phase the initial heat is offered through a big glass while the fire is burning. In this time period the construction, constructed of refractory bricks, absorbs the warmth. This heat is then equally radiated for many hours during the next phase. Masonry fireplaces without a glass fire window just provide heat radiated from its surface. Depending on outside temperatures 1 to 2 daily firings are sufficient to guarantee a constant room temperature.fireplace mantel decor